26 Januari 2017
![]()
FA-50PH fighter trainer aircraft (photo : Lester Tangco)
AFP to acquire PHP23.7-M worth of spares, component for unscheduled maintenance of FA-50PHs
MANILA (PNA) -- The Armed Forces of the Philippines (AFP) is allocating some PHP23,706,000 for the acquisition of spare parts and components needed for the unscheduled maintenance of one of its four Korea Aerospace Industries (KAI)-made FA-50PH "Fighting Eagle" jet fighters.
Pre-bid conference is scheduled on Jan. 26, at 9 a.m. at the Philippine Air Force Procurement Center Conference Roon, Villamor Air Base, Pasay City.
While bid opening is on Feb. 8, at 9 a.m. at the same venue.
The PAF currently has four FA-50PHs in its inventory. Another eight are scheduled to be deliver this year and the next.
The 12-plane order from KAI is worth PHP18.9 billion.
The FA-50PHs has a top speed of Mach 1.5 or one and a half times the speed of sound and is capable of being fitted air-to-air missiles, including the AIM-9 "Sidewinder" air-to-air and heat-seeking missiles aside from light automatic cannons.
It will act as the country's interim fighter until the Philippines get enough experience of operating fast jet assets and money to fund the acquisition of more capable fighter aircraft.
The FA-50PH design is largely derived from the F-16 "Fighting Falcon", and they have many similarities: use of a single engine, speed, size, cost, and the range of weapons.
KAI's previous engineering experience in license-producing the KF-16 was a starting point for the development of the FA-50PHs.
The aircraft can carry two pilots in tandem seating. The high-mounted canopy developed by Hankuk Fiber is applied with stretched acrylic, providing the pilots with good visibility, and has been tested to offer the canopy with ballistic protection against four-pound objects impacting at 400 knots.
The altitude limit is 14,600 meters (48,000 feet), and airframe is designed to last 8,000 hours of service.
There are seven internal fuel tanks with capacity of 2,655 liters (701 US gallons), five in the fuselage and two in the wings.
An additional 1,710 liters (452 US gallons) of fuel can be carried in the three external fuel tanks.
Trainer variants have a paint scheme of white and red, and aerobatic variants white, black, and yellow.
The FA-50PHs uses a single General Electric F404-102 turbofan engine license-produced by Samsung Techwin, upgraded with a full authority digital engine control system jointly developed by General Electric and KAI.
The engine consists of three-staged fans, seven axial stage arrangement, and an afterburner.
Its engine produces a maximum of 78.7 kN (17,700 lbf) of thrust with afterburner.
(PNA)
AFP to acquire PHP23.7-M worth of spares, component for unscheduled maintenance of FA-50PHs
MANILA (PNA) -- The Armed Forces of the Philippines (AFP) is allocating some PHP23,706,000 for the acquisition of spare parts and components needed for the unscheduled maintenance of one of its four Korea Aerospace Industries (KAI)-made FA-50PH "Fighting Eagle" jet fighters.
Pre-bid conference is scheduled on Jan. 26, at 9 a.m. at the Philippine Air Force Procurement Center Conference Roon, Villamor Air Base, Pasay City.
While bid opening is on Feb. 8, at 9 a.m. at the same venue.
The PAF currently has four FA-50PHs in its inventory. Another eight are scheduled to be deliver this year and the next.
The 12-plane order from KAI is worth PHP18.9 billion.
The FA-50PHs has a top speed of Mach 1.5 or one and a half times the speed of sound and is capable of being fitted air-to-air missiles, including the AIM-9 "Sidewinder" air-to-air and heat-seeking missiles aside from light automatic cannons.
It will act as the country's interim fighter until the Philippines get enough experience of operating fast jet assets and money to fund the acquisition of more capable fighter aircraft.
The FA-50PH design is largely derived from the F-16 "Fighting Falcon", and they have many similarities: use of a single engine, speed, size, cost, and the range of weapons.
KAI's previous engineering experience in license-producing the KF-16 was a starting point for the development of the FA-50PHs.
The aircraft can carry two pilots in tandem seating. The high-mounted canopy developed by Hankuk Fiber is applied with stretched acrylic, providing the pilots with good visibility, and has been tested to offer the canopy with ballistic protection against four-pound objects impacting at 400 knots.
The altitude limit is 14,600 meters (48,000 feet), and airframe is designed to last 8,000 hours of service.
There are seven internal fuel tanks with capacity of 2,655 liters (701 US gallons), five in the fuselage and two in the wings.
An additional 1,710 liters (452 US gallons) of fuel can be carried in the three external fuel tanks.
Trainer variants have a paint scheme of white and red, and aerobatic variants white, black, and yellow.
The FA-50PHs uses a single General Electric F404-102 turbofan engine license-produced by Samsung Techwin, upgraded with a full authority digital engine control system jointly developed by General Electric and KAI.
The engine consists of three-staged fans, seven axial stage arrangement, and an afterburner.
Its engine produces a maximum of 78.7 kN (17,700 lbf) of thrust with afterburner.
(PNA)